DSP Sinewave Cards

Leveraging on our sophisticated manufacturing unit we are able to offer a comprehensive range of DSP sine wave inverter cards. Our tested and ready for production range support to OEM supplier and bulk manufacturers. These are customized as per our clients specifications.

• 600VA,800 VA, 12 V single card solution
• 1400 VA 24V singel card solution

OUT PUT PURE SINE WAVE

Voltage Limits (Inverter Mode)

• Mains A.C. Lower Voltage Limit: 110+ 5V
• Mains A.C. Lower Recovery Volt: 120+ 5V
• Mains A.C. Higher Voltage Limit: 275+ 5V
• Mains A.C. Higher Recovery Voltage: 265+ 5V
• Output Voltage in Inverter Mode: 210V+5%

Voltage Limits (UPS Mode)

• Mains A.C. Lower Voltage Limit: 180+ 5V
• Mains A.C. Lower Recovery Voltage: 190+ 5V
• Mains A.C. Higher Voltage Limit: 255+ 5V
• Mains A.C. Higher Recovery Voltage: 245+ 5V

Output Frequency

• Main Output Frequency: Same as Input
• Inverter Output Frequency: 50.0+0.3Hz

Battery Charging

• Battery Charging Voltage Range: 125V- 275V
• Bulk Charging Current: 11.0+2.0Amp for High, 8-10 Amp for Low
• Boost Charging Current: 6+2.0Amp
• Float Charging Current :< 1 A
• Trickle Charging: 3+0.3A (When Battery Is Fully Discharged)
• Battery Charger Boost Voltage: 14.4+0.2V (Per Battery)
• Battery Charger Bulk Voltage: 13.6+0.2V (Per Battery)
• Provision for HI / LOW charging

Battery Lower Voltage Limit: 10+0.3(for 12V System)

THD; <1 on no load and <5. % on full load

• 100+3 %( With Auto Reset Function)
• >300 %( With Manual Reset Function)

Short Circuit, Low Battery and Reverse Battery (With Manual Reset Function)

• Low Battery
• Battery Charging
• Battery charging On
• Inverter On
• Overload
• low Cut (battery)
• Short Circuit
• Fuse blown
• Reverse battery

DSP controlled CC/CV Charger with Soft Start

Charging technology

Embedded with DSP based high frequency five stage dynamic charger & inbuilt battery saver that adjusts itself at battery condition and enhance battery life

Full bridge 20kh PWM for silent operation and fast control.